44GHz Up-Down Converter

Product Overview

Aethertek 24-44GHz up-down converter is designed for 3GPP n257, n258 ,n259 , n260 and n261 applications and testing solutions. The wide IF range allows the user to transit 2~6GHz IF signal to 24~44GHz RF signal with excellent EVM performance and ultra low frequency error. The UDC also support several LO input modes for different applications and instrument sync-up requirements. It is also an ideal alternative choice on cost reduction to replace the expensive high-end mmWave instrument.





  • One entity frequency Up/ Down conversion for IF-RF transition
  • Excellent EVM performance with ultra low frequency error
  • Integrated TX and RX mode to simplify the cable connections of the testing station
  • Innovative S21 parameter measurement feature for an alternative cost-efficient testing solution
  • Easy production line setup mode to reduce the installation time and effort in mass production
Typical application
  • 3GPP n257, n258 and n261 IF-RF transition
  • Economic mmWave OTA testing
  • Economic 24-44GHz flex S-parameter testing
  • Signal generator/ Spectrum analyzer/ VNA extension for mmWave development
RF Frequency Range 24-44GHz (3GPP n257, n258 , n259 , n260 and n261)
Conversion gain 10dB@TX, 10dB@RX
Output P1dB@28GHz 10dBm
Input IP3 11dBm

More Products

RF switch 8T is a device to route high frequency signals through transmission paths

RF Switch 8T

Aethertek SP8T switch is an ideal solution for saving the expensive cost on mmWave instruments. The extreme wide bandwidth from 100MHz to 44GHz can support all the technologies including 2G, 3G, 4G, 5G FR1 and FR2 testings.

Convert signal up/down for transmission

24-30 GHz Up Down Converter

Aethertek 24-30GHz up-down converter is designed for 3GPP n257, n258 and n261 applications and testing solutions.

Shield Boxes

Pneumatic RF shielding boxes are essential for reliable RF testing devices such as Mobile Phones, Bluetooth, and WLAN.

Antenna coupler supporting wide frequency range

Antenna Coupler

Antenna Couplers are designed for use in assembly testing, and near-field, over the air testing. It covers a wide bandwidth frequency, and is suitable for testing inside a shielding space.

Horn Antennas

Used in OTA, far field testing. Aethertek horn antennas is able to cover high frequency testing from 24.25GHz to 43.5GHz.

Vivaldi Antenna

Aethertek Vivaldi antenna are suitable for use in mass production testing, covering sub-6 frequency appliances.

Switch Matrix

Aiming at usage in mass production, the solid state 4P8T switch allow a longer lifetime comparing with typical electro-mechanical switch.

Find the best solution for your project now.

Request for Data Sheet

Enter your email below and one of our Aethertek experts will contact you!